LCD and Operation Panel
The Copy standby screen appears when the printer is turned on.
When the COPY button, SCAN button, or Setup button is pressed, the display switches to copy mode, scan mode, or setup menu screen.
Copy mode
Scan mode
Setup
When the MENU button is pressed in the Copy standby screen or Scan standby screen, the menu screen appears.
Copy menu
Scan menu
In a menu or settings screen, use the button to select an item or option, and then press the OK button to proceed with the procedure.
Note
-
For details on how to change settings, refer to Changing Settings from Operation Panel.
Network Status Indication
Wi-Fi setting and the network status indicate by the icon.
If the icon appears on the LCD when the COPY button, SCAN button, or Setup button is pressed, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router.
Depending on the signal state, the icon will change.
Signal strength: 81 % or more You can use the printer over Wi-Fi without any problems. |
|
Signal strength: 51 % or more The problem such as the printer cannot print may occur according to the network status. We recommend placing the printer near the wireless router. |
|
Signal strength: 50 % or less The problem such as the printer cannot print may occur. Place the printer near the wireless router. |
|
Wi-Fi is enabled but the printer is not connected to the wireless router. |
Note
-
When Wi-Fi is disabled, the icon is not displayed.